Slic3r Settings Database
Name or Username
Printer
*
Please Select
Rostock Max
H-1
Other (specify below)
Any special mods, upgrades, or non-standard parts?
Slic3r Version
EEPROM Extruder steps per mm
Filament material
*
ABS
PLA
Nylon
Other (please describe in notes)
Do you use a cooling fan?
Yes
URL of printed object
Picture of successful print
Upload a File
Cancel
of
Do you have an imgur, photobucket, or other gallery to share?
Layers and Perimeters - Print Settings
Layer Height (mm)
First Layer Height (mm or %)
Vertical shells perimeters
Randomize Starting Points
Checked
Generate extra perimeters when needed
Checked
Horizontal shells top layers
Horizontal shells bottom layers
Avoid crossing perimeters
Checked
External perimeters first
Checked
Infill - Print Settings
Fill density (0-1)
Fill pattern
Please Select
rectilinear
line
concentric
honeycomb
hilbertcurve
archimedeanchords
octagramspiral
Top/bottom fill pattern
Please Select
rectilinear
concentric
hilbertcurve
archimedeanchords
octagramspiral
Infill every x layers
Only infill where needed
Checked
Solid infill every x layers
Fill angle (deg)
Solid infill threshold area (mm2)
Only retract when crossing perimeters
Checked
Infill before perimeters
Checked
Speed - Print Settings
Perimeters (mm/s)
Small perimeters (mm/s or %)
External perimeters (mm/s or %)
Infill (mm/s)
Solid infill (mm/s or %)
Top solid infill (mm/s or %)
Support material (mm/s)
Bridges (mm/s)
Gap fill (mm/s)
Speed for non-print moves, travel (mm/s)
First layer speed (mm/s or %)
Perimeters acceleration (mm/s2)
Infill acceleration (mm/s2)
Bridge acceleration (mm/s2)
Default acceleration (mm/s2)
Skirt and Brim - Print Settings
Loops
Distance from object (mm)
Skirt height (layers)
Minimum extrusion length (mm)
Brim width (mm)
Support Material - Print Settings
Generate support material
Checked
Overhang threshold (deg)
Enforce support for the first x layers
Raft layers
Support and raft pattern
Please Select
Rectilinear
Rectilinear grid
Honeycomb
Pattern spacing (mm)
Pattern angle (deg)
Interface layers
Interface pattern spacing (mm)
Output Options - Print Settings
Complete individual objects
Checked
Extruder clearance radius (mm)
Extruder clearance height (mm)
Output file verbose g-code
Checked
Output file format
Post processing scripts
Multiple Extruders - Print Settings
Perimeter extruder
Infill extruder
Support material extruder
Advanced - Print Settings
Default extrusion width (mm or % leave 0 for auto)
First layer (mm or % leave 0 for default)
Perimeters (mm or % leave 0 for default)
Infill (mm or % leave 0 for default)
Solid infill (mm or % leave 0 for default)
Top solid infill (mm or % leave 0 for default)
Support material
Bridge flow ratio
Threads
Resolution (mm)
Filament - Filament Settings
Diameter (mm)
Extrusion multiplier
Extruder first layer temp (deg-C)
Extruder other layers temp (deg-C)
Bed first layer temp (deg-C)
Bed other layers temp (deg-C)
Cooling - Filament Settings
Enable cooling
Checked
Min fan speed
Max fan speed
Bridges fan speed (%)
Disable fan for first x layers
Keep fan always on
Checked
Enable fan if layer time is below (sec)
Slow down if layer time is below (sec)
Min print speed (mm/s)
General - Printer Settings
Bed size X (mm)
Bed size Y (mm)
Print center X (mm)
Print center Y (mm)
Z offset (mm)
G-code flavor
Please Select
RepRap (Marlin/Sprinter)
Teacup
MakerBot
Sailfish
Mach3/EMC
No Extrusion
Use relative E distances
Checked
Extruders
Vibration limit (hz)
Custom G-code - Printer Settings
Start g-code
End g-code
Layer change g-code
Tool change g-code
Extruder 1 - Printer Settings
Nozzle Diameter (mm)
Extruder offset X (mm)
Extruder offset Y (mm)
Retraction length (mm or 0 to disable)
Retraction lift Z (mm)
Retraction speed (mm/s)
Retraction extra length on restart (mm)
Minimum travel after retraction (mm)
Retract on layer change
Checked
Retraction length when tool is disabled (mm or 0 to disable)
Retraction extra length on restart when tool is disabled (mm)
Submit !
Should be Empty: